From Wikipedia, the free encyclopedia
Jump to navigationJump to search

A UPC-A barcode

A barcode or bar code is a method of representing data in a visual, machine-readable form. Initially, barcodes represented data by varying the widths and spacings of parallel lines. These barcodes, now commonly referred to as linear or one-dimensional (1D), can be scanned by special optical scanners, called barcode readers, of which there are several types. Later, two-dimensional (2D) variants were developed, using rectangles, dots, hexagons and other patterns, called matrix codes or 2D barcodes, although they do not use bars as such. 2D barcodes can be read using purpose-built 2D optical scanners, which exist in a few different forms. 2D barcodes can also be read by a digital camera connected to a microcomputer running software that takes a photographic image of the barcode and analyzes the image to deconstruct and decode the 2D barcode. A mobile device with an inbuilt camera, such as smartphone, can function as the latter type of 2D barcode reader using specialized application software. (The same sort of mobile device could also read 1D barcodes, depending on the application software.)

The barcode was invented by Norman Joseph Woodland and Bernard Silver and patented in the US in 1951.[1] The invention was based on Morse code[2] that was extended to thin and thick bars. However, it took over twenty years before this invention became commercially successful. An early use of one type of barcode in an industrial context was sponsored by the Association of American Railroads in the late 1960s. Developed by General Telephone and Electronics (GTE) and called KarTrak ACI (Automatic Car Identification), this scheme involved placing colored stripes in various combinations on steel plates which were affixed to the sides of railroad rolling stock. Two plates were used per car, one on each side, with the arrangement of the colored stripes encoding information such as ownership, type of equipment, and identification number.[3] The plates were read by a trackside scanner, located for instance, at the entrance to a classification yard, while the car was moving past.[4] The project was abandoned after about ten years because the system proved unreliable after long-term use.[3]

Barcodes became commercially successful when they were used to automate supermarket checkout systems, a task for which they have become almost universal. The Uniform Grocery Product Code Council had chosen, in 1973, the barcode design developed by George Laurer. Laurer's barcode, with vertical bars, printed better than the circular barcode developed by Woodland and Silver.[5] Their use has spread to many other tasks that are generically referred to as automatic identification and data capture (AIDC). The first scanning of the now-ubiquitous Universal Product Code (UPC) barcode was on a pack of Wrigley Company chewing gum in June 1974 at a Marsh supermarket in Troy, Ohio, using scanner produced by Photographic Sciences Corporation.[6][5] QR codes, a specific type of 2D barcode, have recently become very popular due to the growth in smartphone ownership.[7]

Other systems have made inroads in the AIDC market, but the simplicity, universality and low cost of barcodes has limited the role of these other systems, particularly before technologies such as radio-frequency identification (RFID) became available after 1995.

History[edit]

In 1948 Bernard Silver, a graduate student at Drexel Institute of Technology in Philadelphia, Pennsylvania, US overheard the president of the local food chain, Food Fair, asking one of the deans to research a system to automatically read product information during checkout.[8] Silver told his friend Norman Joseph Woodland about the request, and they started working on a variety of systems. Their first working system used ultraviolet ink, but the ink faded too easily and was expensive.[9]

Convinced that the system was workable with further development, Woodland left Drexel, moved into his father's apartment in Florida, and continued working on the system. His next inspiration came from Morse code, and he formed his first barcode from sand on the beach. "I just extended the dots and dashes downwards and made narrow lines and wide lines out of them."[9] To read them, he adapted technology from optical soundtracks in movies, using a 500-watt incandescent light bulb shining through the paper onto an RCA935 photomultiplier tube (from a movie projector) on the far side. He later decided that the system would work better if it were printed as a circle instead of a line, allowing it to be scanned in any direction.

On 20 October 1949, Woodland and Silver filed a patent application for "Classifying Apparatus and Method", in which they described both the linear and bull's eye printing patterns, as well as the mechanical and electronic systems needed to read the code. The patent was issued on 7 October 1952 as US Patent 2,612,994.[1] In 1951, Woodland moved to IBM and continually tried to interest IBM in developing the system. The company eventually commissioned a report on the idea, which concluded that it was both feasible and interesting, but that processing the resulting information would require equipment that was some time off in the future.

IBM offered to buy the patent, but the offer was not accepted. Philco purchased the patent in 1962 and then sold it to RCA sometime later.[9]

Collins at Sylvania[edit]

During his time as an undergraduate, David Jarrett Collins worked at the Pennsylvania Railroad and became aware of the need to automatically identify railroad cars. Immediately after receiving his master's degree from MIT in 1959, he started work at GTE Sylvania and began addressing the problem. He developed a system called KarTrak using blue and red reflective stripes attached to the side of the cars, encoding a six-digit company identifier and a four-digit car number.[9] Light reflected off the colored stripes was read by photomultiplier vacuum tubes.[10]

The Boston and Maine Railroad tested the KarTrak system on their gravel cars in 1961. The tests continued until 1967, when the Association of American Railroads (AAR) selected it as a standard, Automatic Car Identification, across the entire North American fleet. The installations began on 10 October 1967. However, the economic downturn and rash of bankruptcies in the industry in the early 1970s greatly slowed the rollout, and it was not until 1974 that 95% of the fleet was labeled. To add to its woes, the system was found to be easily fooled by dirt in certain applications, which greatly affected accuracy. The AAR abandoned the system in the late 1970s, and it was not until the mid-1980s that they introduced a similar system, this time based on radio tags.[11]

The railway project had failed, but a toll bridge in New Jersey requested a similar system so that it could quickly scan for cars that had purchased a monthly pass. Then the U.S. Post Office requested a system to track trucks entering and leaving their facilities. These applications required special retroreflector labels. Finally, Kal Kan asked the Sylvania team for a simpler (and cheaper) version which they could put on cases of pet food for inventory control.

Computer Identics Corporation[edit]

In 1967, with the railway system maturing, Collins went to management looking for funding for a project to develop a black-and-white version of the code for other industries. They declined, saying that the railway project was large enough, and they saw no need to branch out so quickly.

Collins then quit Sylvania and formed the Computer Identics Corporation.[9] As its first innovations, Computer Identics moved from using incandescent light bulbs in its systems, replacing them with helium–neon lasers, and incorporated a mirror as well, making it capable of locating a barcode up to several feet in front of the scanner. This made the entire process much simpler and more reliable, and typically enabled these devices to deal with damaged labels, as well, by recognizing and reading the intact portions.

Computer Identics Corporation installed one of its first two scanning systems in the spring of 1969 at a General Motors (Buick) factory in Flint, Michigan.[9] The system was used to identify a dozen types of transmissions moving on an overhead conveyor from production to shipping. The other scanning system was installed at General Trading Company's distribution center in Carlstadt, New Jersey to direct shipments to the proper loading bay.

Universal Product Code[edit]

In 1966, the National Association of Food Chains (NAFC) held a meeting on the idea of automated checkout systems. RCA, who had purchased the rights to the original Woodland patent, attended the meeting and initiated an internal project to develop a system based on the bullseye code. The Kroger grocery chain volunteered to test it.

In the mid-1970s, the NAFC established the Ad-Hoc Committee for U.S. Supermarkets on a Uniform Grocery-Product Code to set guidelines for barcode development. In addition, it created a symbol-selection subcommittee to help standardize the approach. In cooperation with consulting firm, McKinsey & Co., they developed a standardized 11-digit code for identifying products. The committee then sent out a contract tender to develop a barcode system to print and read the code. The request went to Singer, National Cash Register (NCR), Litton Industries, RCA, Pitney-Bowes, IBM and many others.[12] A wide variety of barcode approaches was studied, including linear codes, RCA's bullseye concentric circle code, starburst patterns and others.

In the spring of 1971, RCA demonstrated their bullseye code at another industry meeting. IBM executives at the meeting noticed the crowds at the RCA booth and immediately developed their own system. IBM marketing specialist Alec Jablonover remembered that the company still employed Woodland, and he[who?] established a new facility in Raleigh-Durham Research Triangle Park to lead development.

In July 1972, RCA began an 18-month test in a Kroger store in Cincinnati. Barcodes were printed on small pieces of adhesive paper, and attached by hand by store employees when they were adding price tags. The code proved to have a serious problem; the printers would sometimes smear ink, rendering the code unreadable in most orientations. However, a linear code, like the one being developed by Woodland at IBM, was printed in the direction of the stripes, so extra ink would simply make the code "taller" while remaining readable. So on 3 April 1973, the IBM UPC was selected as the NAFC standard. IBM had designed five versions of UPC symbology for future industry requirements: UPC A, B, C, D, and E.[13]

NCR installed a testbed system at Marsh's Supermarket in Troy, Ohio, near the factory that was producing the equipment. On 26 June 1974, Clyde Dawson pulled a 10-pack of Wrigley's Juicy Fruit gum out of his basket and it was scanned by Sharon Buchanan at 8:01 am. The pack of gum and the receipt are now on display in the Smithsonian Institution. It was the first commercial appearance of the UPC.[14]

In 1971, an IBM team was assembled for an intensive planning session, threshing out, 12 to 18 hours a day, how the technology would be deployed and operate cohesively across the system, and scheduling a roll-out plan. By 1973, the team were meeting with grocery manufacturers to introduce the symbol that would need to be printed on the packaging or labels of all of their products. There were no cost savings for a grocery to use it, unless at least 70% of the grocery's products had the barcode printed on the product by the manufacturer. IBM projected that 75% would be needed in 1975. Yet, although this was achieved, there were still scanning machines in fewer than 200 grocery stores by 1977.[15]

Economic studies conducted for the grocery industry committee projected over $40 million in savings to the industry from scanning by the mid-1970s. Those numbers were not achieved in that time-frame and some predicted the demise of barcode scanning. The usefulness of the barcode required the adoption of expensive scanners by a critical mass of retailers while manufacturers simultaneously adopted barcode labels. Neither wanted to move first and results were not promising for the first couple of years, with Business Week proclaiming "The Supermarket Scanner That Failed" in a 1976 article.[14][16]

On the other hand, experience with barcode scanning in those stores revealed additional benefits. The detailed sales information acquired by the new systems allowed greater responsiveness to customer habits, needs and preferences. This was reflected in the fact that about 5 weeks after installing barcode scanners, sales in grocery stores typically started climbing and eventually leveled off at a 10–12% increase in sales that never dropped off. There was also a 1–2% decrease in operating cost for those stores, and this enabled them to lower prices and thereby to increase market share. It was shown in the field that the return on investment for a barcode scanner was 41.5%. By 1980, 8,000 stores per year were converting.[15]

Sims Supermarkets were the first location in Australia to use barcodes, starting in 1979.[17]

Industrial adoption[edit]

In 1981, the United States Department of Defense adopted the use of Code 39 for marking all products sold to the United States military. This system, Logistics Applications of Automated Marking and Reading Symbols (LOGMARS), is still used by DoD and is widely viewed as the catalyst for widespread adoption of barcoding in industrial uses.[18]

Use[edit]

EAN-13 ISBN barcode
Barcode on a patient identification wristband
Barcoded parcel

Barcodes are widely used around the world in many contexts. In stores, UPC barcodes are pre-printed on most items other than fresh produce from a grocery store. This speeds up processing at check-outs and helps track items and also reduces instances of shoplifting involving price tag swapping, although shoplifters can now print their own barcodes.[19] Barcodes that encode a book's ISBN are also widely pre-printed on books, journals and other printed materials. In addition, retail chain membership cards use barcodes to identify customers, allowing for customized marketing and greater understanding of individual consumer shopping patterns. At the point of sale, shoppers can get product discounts or special marketing offers through the address or e-mail address provided at registration.

Barcodes are widely used in the healthcare and hospital settings, ranging from patient identification (to access patient data, including medical history, drug allergies, etc.) to creating SOAP Notes[20] with barcodes to medication management. They are also used to facilitate the separation and indexing of documents that have been imaged in batch scanning applications, track the organization of species in biology,[21] and integrate with in-motion checkweighers to identify the item being weighed in a conveyor line for data collection.

They can also be used to keep track of objects and people; they are used to keep track of rental cars, airline luggage, nuclear waste, registered mail, express mail and parcels. Barcoded tickets (which may be printed by the customer on their home printer, or stored on their mobile device) allow the holder to enter sports arenas, cinemas, theatres, fairgrounds, and transportation, and are used to record the arrival and departure of vehicles from rental facilities etc. This can allow proprietors to identify duplicate or fraudulent tickets more easily. Barcodes are widely used in shop floor control applications software where employees can scan work orders and track the time spent on a job.

Barcodes are also used in some kinds of non-contact 1D and 2D position sensors. A series of barcodes are used in some kinds of absolute 1D linear encoder. The barcodes are packed close enough together that the reader always has one or two barcodes in its field of view. As a kind of fiducial marker, the relative position of the barcode in the field of view of the reader gives incremental precise positioning, in some cases with sub-pixel resolution. The data decoded from the barcode gives the absolute coarse position. An "address carpet", such as Howell's binary pattern and the Anoto dot pattern, is a 2D barcode designed so that a reader, even though only a tiny portion of the complete carpet is in the field of view of the reader, can find its absolute X,Y position and rotation in the carpet.[22][23]

2D barcodes can embed a hyperlink to a web page. A mobile device with an inbuilt camera might be used to read the pattern and browse the linked website, which can help a shopper find the best price for an item in the vicinity. Since 2005, airlines use an IATA-standard 2D barcode on boarding passes (Bar Coded Boarding Pass (BCBP)), and since 2008 2D barcodes sent to mobile phones enable electronic boarding passes.[24]

Some applications for barcodes have fallen out of use. In the 1970s and 1980s, software source code was occasionally encoded in a barcode and printed on paper (Cauzin Softstrip and Paperbyte[25] are barcode symbologies specifically designed for this application), and the 1991 Barcode Battler computer game system used any standard barcode to generate combat statistics.

Artists have used barcodes in art, such as Scott Blake's Barcode Jesus, as part of the post-modernism movement.

Symbologies[edit]

The mapping between messages and barcodes is called a symbology. The specification of a symbology includes the encoding of the message into bars and spaces, any required start and stop markers, the size of the quiet zone required to be before and after the barcode, and the computation of a checksum.

Linear symbologies can be classified mainly by two properties:

Continuous vs. discrete
  • Characters in discrete symbologies are composed of n bars and n − 1 spaces. There is an additional space between characters, but it does not convey information, and may have any width as long as it is not confused with the end of the code.
  • Characters in continuous symbologies are composed of n bars and n spaces, and usually abut, with one character ending with a space and the next beginning with a bar, or vice versa. A special end pattern that has bars on both ends is required to end the code.
Two-width vs. many-width
  • A two-width, also called a binary bar code, contains bars and spaces of two widths, "wide" and "narrow". The precise width of the wide bars and spaces is not critical; typically it is permitted to be anywhere between 2 and 3 times the width of the narrow equivalents.
  • Some other symbologies use bars of two different heights (POSTNET), or the presence or absence of bars (CPC Binary Barcode). These are normally also considered binary bar codes.
  • Bars and spaces in many-width symbologies are all multiples of a basic width called the module; most such codes use four widths of 1, 2, 3 and 4 modules.

Some symbologies use interleaving. The first character is encoded using black bars of varying width. The second character is then encoded by varying the width of the white spaces between these bars. Thus characters are encoded in pairs over the same section of the barcode. Interleaved 2 of 5 is an example of this.

Stacked symbologies repeat a given linear symbology vertically.

The most common among the many 2D symbologies are matrix codes, which feature square or dot-shaped modules arranged on a grid pattern. 2D symbologies also come in circular and other patterns and may employ steganography, hiding modules within an image (for example, DataGlyphs).

Linear symbologies are optimized for laser scanners, which sweep a light beam across the barcode in a straight line, reading a slice of the barcode light-dark patterns. Scanning at an angle makes the modules appear wider, but does not change the width ratios. Stacked symbologies are also optimized for laser scanning, with the laser making multiple passes across the barcode.

In the 1990s development of charge-coupled device (CCD) imagers to read barcodes was pioneered by Welch Allyn. Imaging does not require moving parts, as a laser scanner does. In 2007, linear imaging had begun to supplant laser scanning as the preferred scan engine for its performance and durability.

2D symbologies cannot be read by a laser, as there is typically no sweep pattern that can encompass the entire symbol. They must be scanned by an image-based scanner employing a CCD or other digital camera sensor technology.

Barcode readers[edit]

GTIN barcodes on Coke bottles. The images at right show how the laser of barcode readers "see" the images behind a red filter.

The earliest, and still the cheapest, barcode scanners are built from a fixed light and a single photosensor that is manually moved across the barcode. Barcode scanners can be classified into three categories based on their connection to the computer. The older type is the RS-232 barcode scanner. This type requires special programming for transferring the input data to the application program. Keyboard interface scanners connect to a computer using a PS/2 or AT keyboard–compatible adaptor cable (a "keyboard wedge"). The barcode's data is sent to the computer as if it had been typed on the keyboard.

Like the keyboard interface scanner, USB scanners do not need custom code for transferring input data to the application program. On PCs running Windows the human interface device emulates the data merging action of a hardware "keyboard wedge", and the scanner automatically behaves like an additional keyboard.

Most modern smartphones are able to decode barcode using their built-in camera. Google's mobile Android operating system can use their own Google Lens application to scan QR codes, or third party apps like Barcode Scanner to read both one-dimensional barcodes and QR codes. Nokia's Symbian operating system featured a barcode scanner,[26] while mbarcode[27] is a QR code reader for the Maemo operating system. In Apple iOS 11, the native camera app can decode QR codes and can link to URLs, join wireless networks, or perform other operations depending on the QR Code contents.[28] Other paid and free apps are available with scanning capabilities for other symbologies or for earlier iOS versions.[29] With BlackBerry devices, the App World application can natively scan barcodes and load any recognized Web URLs on the device's Web browser. Windows Phone 7.5 is able to scan barcodes through the Bing search app. However, these devices are not designed specifically for the capturing of barcodes. As a result, they do not decode nearly as quickly or accurately as a dedicated barcode scanner or portable data terminal.[citation needed]

Quality control and verification[edit]

It is common for producers and users of bar codes to have a quality management system which includes verification and validation of bar codes.[30] Barcode verification examines scanability and the quality of the barcode in comparison to industry standards and specifications.[31] Barcode verifiers are primarily used by businesses that print and use barcodes. Any trading partner in the supply chain can test barcode quality. It is important to verify a barcode to ensure that any reader in the supply chain can successfully interpret a barcode with a low error rate. Retailers levy large penalties for non-compliant barcodes. These chargebacks can reduce a manufacturer's revenue by 2% to 10%.[32]

A barcode verifier works the way a reader does, but instead of simply decoding a barcode, a verifier performs a series of tests. For linear barcodes these tests are:

  • Edge contrast (EC)[33]
    • The difference between the space reflectance (Rs) and adjoining bar reflectance (Rb). EC=Rs-Rb
  • Minimum bar reflectance (Rb)[33]
    • The smallest reflectance value in a bar.
  • Minimum space reflectance (Rs)[33]
    • The smallest reflectance value in a space.
  • Symbol contrast (SC)[33]
    • Symbol Contrast is the difference in reflectance values of the lightest space (including the quiet zone) and the darkest bar of the symbol. The greater the difference, the higher the grade. The parameter is graded as either A, B, C, D, or F. SC=Rmax-Rmin
  • Minimum edge contrast (ECmin)[33]
    • The difference between the space reflectance (Rs) and adjoining bar reflectance (Rb). EC=Rs-Rb
  • Modulation (MOD)[33]
    • The parameter is graded either A, B, C, D, or F. This grade is based on the relationship between minimum edge contrast (ECmin) and symbol contrast (SC). MOD=ECmin/SC The greater the difference between minimum edge contrast and symbol contrast, the lower the grade. Scanners and verifiers perceive the narrower bars and spaces to have less intensity than wider bars and spaces; the comparison of the lesser intensity of narrow elements to the wide elements is called modulation. This condition is affected by aperture size.
  • Inter-character gap[33]
    • In discrete barcodes, the space that disconnects the two contiguous characters. When present, inter-character gaps are considered spaces (elements) for purposes of edge determination and reflectance parameter grades.
  • Defects
  • Decode[33]
    • Extracting the information which has been encoded in a bar code symbol.
  • Decodability[33]
    • Can be graded as A, B, C, D, or F. The Decodability grade indicates the amount of error in the width of the most deviant element in the symbol. The less deviation in the symbology, the higher the grade. Decodability is a measure of print accuracy using the symbology reference decode algorithm.

2D matrix symbols look at the parameters:

  • Symbol contrast[33]
  • Modulation[33]
  • Decode[33]
  • Unused error correction
  • Fixed (finder) pattern damage
  • Grid non-uniformity
  • Axial non-uniformity[34]

Depending on the parameter, each ANSI test is graded from 0.0 to 4.0 (F to A), or given a pass or fail mark. Each grade is determined by analyzing the scan reflectance profile (SRP), an analog graph of a single scan line across the entire symbol. The lowest of the 8 grades is the scan grade, and the overall ISO symbol grade is the average of the individual scan grades. For most applications a 2.5 (C) is the minimal acceptable symbol grade.[35]

Compared with a reader, a verifier measures a barcode's optical characteristics to international and industry standards. The measurement must be repeatable and consistent. Doing so requires constant conditions such as distance, illumination angle, sensor angle and verifier aperture. Based on the verification results, the production process can be adjusted to print higher quality barcodes that will scan down the supply chain.

Bar code validation may include evaluations after use (and abuse) testing such as sunlight, abrasion, impact, moisture, etc.[36]

Barcode verifier standards[edit]

Barcode verifier standards are defined by the International Organization for Standardization (ISO), in ISO/IEC 15426-1 (linear) or ISO/IEC 15426-2 (2D).[citation needed] The current international barcode quality specification is ISO/IEC 15416 (linear) and ISO/IEC 15415 (2D).[citation needed] The European Standard EN 1635 has been withdrawn and replaced by ISO/IEC 15416. The original U.S. barcode quality specification was ANSI X3.182. (UPCs used in the US – ANSI/UCC5).[citation needed] As of 2011 the ISO workgroup JTC1 SC31 was developing a Direct Part Marking (DPM) quality standard: ISO/IEC TR 29158.[37]

Benefits[edit]

In point-of-sale management, barcode systems can provide detailed up-to-date information on the business, accelerating decisions and with more confidence. For example:

  • Fast-selling items can be identified quickly and automatically reordered.
  • Slow-selling items can be identified, preventing inventory build-up.
  • The effects of merchandising changes can be monitored, allowing fast-moving, more profitable items to occupy the best space.
  • Historical data can be used to predict seasonal fluctuations very accurately.
  • Items may be repriced on the shelf to reflect both sale prices and price increases.
  • This technology also enables the profiling of individual consumers, typically through a voluntary registration of discount cards. While pitched as a benefit to the consumer, this practice is considered to be potentially dangerous by privacy advocates.[which?]

Besides sales and inventory tracking, barcodes are very useful in logistics and supply chain management.

  • When a manufacturer packs a box for shipment, a Unique Identifying Number (UID) can be assigned to the box.
  • A database can link the UID to relevant information about the box; such as order number, items packed, quantity packed, destination, etc.
  • The information can be transmitted through a communication system such as Electronic Data Interchange (EDI) so the retailer has the information about a shipment before it arrives.
  • Shipments that are sent to a Distribution Center (DC) are tracked before forwarding. When the shipment reaches its final destination, the UID gets scanned, so the store knows the shipment's source, contents, and cost.

Barcode scanners are relatively low cost and extremely accurate compared to key-entry, with only about 1 substitution error in 15,000 to 36 trillion characters entered.[38][unreliable source?] The exact error rate depends on the type of barcode.

Types of barcodes[edit]

Linear barcodes[edit]

A first generation, "one dimensional" barcode that is made up of lines and spaces of various widths that create specific patterns.

Matrix (2D) barcodes[edit]

A matrix code, also termed a 2D barcode or simply a 2D code, is a two-dimensional way to represent information. It is similar to a linear (1-dimensional) barcode, but can represent more data per unit area.

Example images[edit]

  • First, Second and Third Generation Barcodes
  • GTIN-12 number encoded in UPC-A barcode symbol. First and last digit are always placed outside the symbol to indicate Quiet Zones that are necessary for barcode scanners to work properly

  • EAN-13 (GTIN-13) number encoded in EAN-13 barcode symbol. First digit is always placed outside the symbol, additionally right quiet zone indicator (>) is used to indicate Quiet Zones that are necessary for barcode scanners to work properly

  • "Wikipedia" encoded in Code 93

  • "*WIKI39*" encoded in Code 39

  • 'Wikipedia" encoded in Code 128

  • An example of a stacked barcode. Specifically a "Codablock" barcode.

  • PDF417 sample

  • Lorem ipsum boilerplate text as four segment Data Matrix 2D

  • "This is an example Aztec symbol for Wikipedia" encoded in Aztec Code

  • Text 'EZcode'

  • High Capacity Color Barcode of the URL for Wikipedia's article on High Capacity Color Barcode

  • "Wikipedia, The Free Encyclopedia" in several languages encoded in DataGlyphs

  • Two different 2D barcodes used in film: Dolby Digital between the sprocket holes with the "Double-D" logo in the middle, and Sony Dynamic Digital Sound in the blue area to the left of the sprocket holes

  • The QR Code for the Wikipedia URL. "Quick Response", the most popular 2D barcode. It is open in that the specification is disclosed and the patent is not exercised.[76]

  • MaxiCode example. This encodes the string "Wikipedia, The Free Encyclopedia"

  • ShotCode sample

  • detail of Twibright Optar scan from laser printed paper, carrying 32 kbit/s Ogg Vorbis digital music (48 seconds per A4 page)

  • A KarTrak railroad Automatic Equipment Identification label on a caboose in Florida

In popular culture[edit]

In architecture, a building in Lingang New City by German architects Gerkan, Marg and Partners incorporates a barcode design,[77] as does a shopping mall called Shtrikh-kod (Russian for barcode) in Narodnaya ulitsa ("People's Street") in the Nevskiy district of St. Petersburg, Russia.[78]

In media, in 2011, the National Film Board of Canada and ARTE France launched a web documentary entitled Barcode.tv, which allows users to view films about everyday objects by scanning the product's barcode with their iPhone camera.[79][80]

In professional wrestling, the WWE stable D-Generation X incorporated a barcode into their entrance video, as well as on a T-shirt.[81][82]

In the TV series Dark Angel, the protagonist and the other transgenics in the Manticore X-series have barcodes on the back of their necks.

In video games, the protagonist of the Hitman video game series has a barcode tattoo on the back of his head. Also, QR codes can be scanned for an extra mission on Watch Dogs.

In the films Back to the Future Part II and The Handmaid's Tale, cars in the future are depicted with barcode licence plates.

In the Terminator films, Skynet burns barcodes onto the inside surface of the wrists of captive humans (in a similar location to the WW2 concentration camp tattoos) as a unique identifier.

In music, Dave Davies of The Kinks released a solo album in 1980, AFL1-3603, which featured a giant barcode on the front cover in place of the musician's head. The album's name was also the barcode number.

The April 1978 issue of Mad Magazine featured a giant barcode on the cover, with the blurb "[Mad] Hopes this issue jams up every computer in the country...for forcing us to deface our covers with this yecchy UPC symbol from now on!"

The 2018 videogame Judgment features QR Codes that protagonist Takayuki Yagami can photograph with his phone camera. These are mostly to unlock parts for Yagami's Drone.[83]

Interactive Textbooks were first published by Harcourt College Publishers to Expand Education Technology with Interactive Textbooks.[84]

Designed barcodes[edit]

Some brands integrate custom designs into barcodes (while keeping them readable) on their consumer products.

Hoaxes about barcodes[edit]

There was minor skepticism from conspiracy theorists, who considered barcodes to be an intrusive surveillance technology, and from some Christians, pioneered by a 1982 book The New Money System 666 by Mary Stewart Relfe, who thought the codes hid the number 666, representing the "Number of the Beast".[85] Old Believers, a separation of the Russian Orthodox Church, believe barcodes are the stamp of the Antichrist.[86] Television host Phil Donahue described barcodes as a "corporate plot against consumers".[87]

See also[edit]

  • Automated identification and data capture (AIDC)
  • Barcode printer
  • European Article Numbering-Uniform Code Council
  • Global Trade Item Number
  • Identifier
  • Inventory control system
  • Object hyperlinking
  • Semacode
  • SMS barcode
  • SPARQCode (QR code)
  • List of GS1 country codes

References[edit]

  1. ^ a b US patent 2612994 
  2. ^ "How Barcodes Work". Stuff You Should Know. 4 June 2019. Retrieved 5 June 2019.
  3. ^ a b Cranstone, Ian. "A guide to ACI (Automatic Car Identification)/KarTrak". Canadian Freight Cars A resource page for the Canadian Freight Car Enthusiast. Retrieved 26 May 2013.
  4. ^ Keyes, John (22 August 2003). "KarTrak". John Keyes Boston photoblogger. Images from Boston, New England, and beyond. John Keyes. Archived from the original on 10 March 2014. Retrieved 26 May 2013.
  5. ^ a b Roberts, Sam (11 December 2019). "George Laurer, Who Developed the Bar Code, Is Dead at 94". New York Times. Retrieved 13 December 2019.
  6. ^ Fox, Margalit (15 June 2011). "Alan Haberman, Who Ushered in the Bar Code, Dies at 81". New York Times.
  7. ^ G. F. (2 November 2017). "Why QR codes are on the rise". The Economist. Retrieved 5 February 2018.
  8. ^ Fishman, Charles (1 August 2001). "The Killer App – Bar None". American Way. Archived from the original on 12 January 2010. Retrieved 19 April 2010.
  9. ^ a b c d e f Seideman, Tony (Spring 1993), "Barcodes Sweep the World", Wonders of Modern Technology, archived from the original on 16 October 2016
  10. ^ Dunn, Peter (20 October 2015). "David Collins, SM '59: Making his mark on the world with bar codes". technologyreview.com. MIT. Retrieved 2 December 2019.
  11. ^ Graham-White, Sean (August 1999). "Do You Know Where Your Boxcar Is?". Trains. 59 (8): 48–53.
  12. ^ Laurer, George. "Development of the U.P.C. Symbol". Archived from the original on 25 September 2008.
  13. ^ Nelson, Benjamin (1997). Punched Cards To Bar Codes: A 200-year journey. Peterborough, N.H.: Helmers. ISBN 9780911261127.
  14. ^ a b Varchaver, Nicholas (31 May 2004). "Scanning the Globe". Fortune. Archived from the original on 14 November 2006. Retrieved 27 November 2006.
  15. ^ a b Selmeier, Bill (2009). Spreading the Barcode. Lulu. pp. 26, 214, 236, 238, 244, 245, 236, 238, 244, 245. ISBN 978-0-578-02417-2.
  16. ^ Rawsthorn, Alice (23 February 2010). "Scan Artists". New York Times. Retrieved 31 July 2015.
  17. ^ "World hails barcode on important birthday". ATN. 1 July 2014.
  18. ^ "A Short History of Bar Code". BarCode 1. Adams Communications. Retrieved 28 November 2011.
  19. ^ "Barcode". iWatch Systems. 2 May 2011. Retrieved 28 November 2011.
  20. ^ Oberfield, Craig. "QNotes Barcode System". US Patented #5296688. Quick Notes Inc. Retrieved 15 December 2012.
  21. ^ National Geographic, May 2010, page 30
  22. ^ Hecht, David L. (March 2001). "Printed Embedded Data Graphical User Interfaces" (PDF). IEEE Computer. Xerox Palo Alto Research Center. 34 (3): 47–55. doi:10.1109/2.910893. Archived from the original (PDF) on 3 June 2013.
  23. ^ Howell, Jon; Kotay, Keith (March 2000). "Landmarks for absolute localization". Dartmouth Computer Science Technical Report TR2000-364.
  24. ^ "IATA.org". IATA.org. 21 November 2011. Retrieved 28 November 2011.
  25. ^ "Paperbyte Bar Codes for Waduzitdo". Byte magazine. September 1978. p. 172.
  26. ^ "Nokia N80 Support". Nokia Europe. Archived from the original on 14 July 2011.
  27. ^ "package overview for mbarcode". Maemo.org. Retrieved 28 July 2010.
  28. ^ Sargent, Mikah (24 September 2017). "How to use QR codes in iOS 11". iMore. Retrieved 1 October 2017.
  29. ^ "15+ Best Barcode Scanner iPhone Applications". iPhoneness. 3 March 2017. Retrieved 1 October 2017.
  30. ^ David, H (28 November 2018), "Barcodes – Validation vs Verification in GS1", Labeling News, retrieved 6 June 2020
  31. ^ "Layman's Guide to ANSI, CEN, and ISO Barcode Print Quality Documents" (PDF). Association for Automatic Identification and Data Capture Technologies (AIM). 2002. Retrieved 23 November 2017.
  32. ^ Zieger, Anne (October 2003). "Retailer chargebacks: is there an upside? Retailer compliance initiatives can lead to efficiency". Frontline Solutions. Archived from the original on 8 July 2012.
  33. ^ a b c d e f g h i j k l Corp, Express. "Barcode Glossary | Express". Express Corp. Retrieved 11 December 2019.
  34. ^ Bar Code Verification Best Practice work team (May 2010). "GS1 DataMatrix: An introduction and technical overview of the most advanced GS1 Application Identifiers compliant symbology" (PDF). Global Standards 1. 1 (17): 34–36. Archived (PDF) from the original on 20 July 2011. Retrieved 2 August 2011.
  35. ^ GS1 Bar Code Verification Best Practice work team (May 2009). "GS1 Bar Code Verification for Linear Symbols" (PDF). Global Standards 1. 4 (3): 23–32. Retrieved 2 August 2011.
  36. ^ Garner, J (2019), Results of Data Matrix Barcode Testing for Field Applications, Oak Ridge National Laboratory, retrieved 6 June 2020
  37. ^ "Technical committees – JTC 1/SC 31 – Automatic identification and data capture techniques". ISO. Retrieved 28 November 2011.
  38. ^ Harmon, Craig K.; Adams, Russ (1989). Reading Between The Lines:An Introduction to Bar Code Technology. Peterborough, NH: Helmers. p. 13. ISBN 0-911261-00-1.
  39. ^ "AR Code Generator"
  40. ^ Gernat, Tim; Rao, Vikyath D.; Middendorf, Martin; Dankowicz, Harry; Goldenfeld, Nigel; Robinson, Gene E. (13 February 2018). "Automated monitoring of behavior reveals bursty interaction patterns and rapid spreading dynamics in honeybee social networks". Proceedings of the National Academy of Sciences. 115 (7): 1433–1438. doi:10.1073/pnas.1713568115. ISSN 0027-8424. PMC 5816157. PMID 29378954.
  41. ^ Combes, Stacey A.; Mountcastle, Andrew M.; Gravish, Nick; Crall, James D. (2 September 2015). "BEEtag: A Low-Cost, Image-Based Tracking System for the Study of Animal Behavior and Locomotion". PLOS ONE. 10 (9): e0136487. Bibcode:2015PLoSO..1036487C. doi:10.1371/journal.pone.0136487. ISSN 1932-6203. PMC 4558030. PMID 26332211.
  42. ^ https://github.com/piql/boxing
  43. ^ Adams, Russ (15 June 2009). "2-Dimensional Bar Code Page". Archived from the original on 7 July 2011. Retrieved 6 June 2011.
  44. ^ a b "2-Dimensional Bar Code Page". www.adams1.com. Retrieved 12 January 2019.
  45. ^ "Code 16K Specs" (PDF). www.gomaro.ch. Retrieved 12 January 2019.
  46. ^ "Colorzip.com". Colorzip.com. Retrieved 28 November 2011.
  47. ^ "Barcodes for TV Commercials". Adverlab. 31 January 2006. Retrieved 10 June 2009.
  48. ^ "About". Colour Code Technologies. Archived from the original on 29 August 2012. Retrieved 4 November 2012.
  49. ^ "Frequently Asked Questions". ColorCCode. Archived from the original on 21 February 2013. Retrieved 4 November 2012.
  50. ^ "New system to combat online banking fraud". University of Cambridge. 18 April 2013. Retrieved 21 January 2020.
  51. ^ Cronto Visual Transaction Signing, OneSpan, retrieved 6 December 2019
  52. ^ d-touch topological fiducial recognition, MIT, archived from the original on 2 March 2008.
  53. ^ d-touch markers are applied to deformable gloves, MIT, archived from the original on 21 June 2008.
  54. ^ See Xerox.com for details.
  55. ^ "DataGlyphs: Embedding Digital Data". Microglyphs. 3 May 2006. Retrieved 10 March 2014.
  56. ^ ""DataGlyph" Embedded Digital Data". Tauzero. Retrieved 10 March 2014.
  57. ^ "DataGlyphs". Xerox. Retrieved 10 March 2014.
  58. ^ "Better Barcodes, Better Business" (PDF).
  59. ^ Dot Code A at barcode.ro
  60. ^ Dot Code A Patent
  61. ^ "GS1 Germany and Digimarc Announce Collaboration to Bring DWCode to the German Market".
  62. ^ "Scanbuy". Retrieved 28 November 2011.
  63. ^ a b Steeman, Jeroen. "Online QR Code Decoder". Archived from the original on 9 January 2014. Retrieved 9 January 2014.
  64. ^ "BarCode-1 2-Dimensional Bar Code Page". Adams. Archived from the original on 3 November 2008. Retrieved 10 June 2009.
  65. ^ "Global Research Solutions – 2D Barcodes". grs.weebly.com. Retrieved 12 January 2019.
  66. ^ a b Kato, Hiroko; Tan, Keng T.; Chai, Douglas (8 April 2010). Barcodes for Mobile Devices. Cambridge University Press. ISBN 9781139487511.
  67. ^ "US Patent 9270846: Content encoded luminosity modulation"
  68. ^ "US Patent 8180163: Encoder and decoder and methods of encoding and decoding sequence information with inserted monitor flags"
  69. ^ "Screen Codes: Visual Hyperlinks for Displays"
  70. ^ "Snapchat is changing the way you watch snaps and add friends"
  71. ^ "Snapchat Lets You Add People Via QR Snaptags Thanks To Secret Scan.me Acquisition"
  72. ^ "How Snapchat Made QR Codes Cool Again"
  73. ^ 5825015, Chan, John Paul & GB, "United States Patent: 5825015 – Machine readable binary codes", issued 20 October 1998 
  74. ^ "US Patent 5825015". pdfpiw.uspto.gov. 20 October 1998. Retrieved 12 January 2019.
  75. ^ "Trillcode Barcode". Barcoding, Inc. 17 February 2009. Retrieved 12 January 2019.
  76. ^ (株)デンソーウェーブ, denso-wave.com (in Japanese) Copyright
  77. ^ Barcode Halls – gmp Archived 18 October 2011 at the Wayback Machine
  78. ^ "image". Peterburg2.ru. Retrieved 28 November 2011.
  79. ^ Lavigne, Anne-Marie (5 October 2011). "Introducing Barcode.tv, a new interactive doc about the objects that surround us". NFB Blog. National Film Board of Canada. Retrieved 7 October 2011.
  80. ^ Anderson, Kelly (6 October 2011). "NFB, ARTE France launch 'Bar Code'". Reelscreen. Retrieved 7 October 2011.
  81. ^ [1] Archived 16 March 2015 at the Wayback Machine
  82. ^ "Dx theme song 2009–2010". YouTube. 19 December 2009. Retrieved 10 March 2014.
  83. ^ Diego Agruello (27 June 2019). "Judgment QR code locations to upgrade Drone Parts explained • Eurogamer.net". Retrieved 3 August 2019.
  84. ^ "CueCat History". CueCat History. Retrieved 12 November 2019.
  85. ^ "What about barcodes and 666: The Mark of the Beast?". Av1611.org. 1999. Retrieved 14 March 2014.
  86. ^ Serafino, Jay (26 July 2018). "The Russian Family That Cut Itself Off From Civilization for More Than 40 Years". Mental Floss. Retrieved 6 May 2020.
  87. ^ Bishop, Tricia (5 July 2004). "UPC bar code has been in use 30 years". SFgate.com. Archived from the original on 23 August 2004. Retrieved 22 December 2009.

Further reading[edit]

  • Automating Management Information Systems: Barcode Engineering and Implementation – Harry E. Burke, Thomson Learning, ISBN 0-442-20712-3
  • Automating Management Information Systems: Principles of Barcode Applications – Harry E. Burke, Thomson Learning, ISBN 0-442-20667-4
  • The Bar Code Book – Roger C. Palmer, Helmers Publishing, ISBN 0-911261-09-5, 386 pages
  • The Bar Code Manual – Eugene F. Brighan, Thompson Learning, ISBN 0-03-016173-8
  • Handbook of Bar Coding Systems – Harry E. Burke, Van Nostrand Reinhold Company, ISBN 978-0-442-21430-2, 219 pages
  • Information Technology for Retail:Automatic Identification & Data Capture Systems – Girdhar Joshi, Oxford University Press, ISBN 0-19-569796-0, 416 pages
  • Lines of Communication – Craig K. Harmon, Helmers Publishing, ISBN 0-911261-07-9, 425 pages
  • Punched Cards to Bar Codes – Benjamin Nelson, Helmers Publishing, ISBN 0-911261-12-5, 434 pages
  • Revolution at the Checkout Counter: The Explosion of the Bar Code – Stephen A. Brown, Harvard University Press, ISBN 0-674-76720-9
  • Reading Between The Lines – Craig K. Harmon and Russ Adams, Helmers Publishing, ISBN 0-911261-00-1, 297 pages
  • The Black and White Solution: Bar Code and the IBM PC – Russ Adams and Joyce Lane, Helmers Publishing, ISBN 0-911261-01-X, 169 pages
  • Sourcebook of Automatic Identification and Data Collection – Russ Adams, Van Nostrand Reinhold, ISBN 0-442-31850-2, 298 pages
  • Inside Out: The Wonders of Modern Technology – Carol J. Amato, Smithmark Pub, ISBN 0831746572, 1993

External links[edit]

  • Barcode at Curlie
  • Barcode Glossary of Terms
  • Pros and cons and relative popularity of different 1D and 2D barcode codes.